API RP 7G-1-2023_e1_e2-2024

VIP免费

Carl 2024-11-04 15 6.16MB 100 页 16星币

侵权投诉

Drill Stem Performance Properties

API RECOMMENDED PRACTICE 7G-1

FIRST EDITION, APRIL 2023

ERRATA 1, FEBRUARY 2024

ERRATA 2, SEPTEMBER 2024

Special Notes

API publications necessarily address problems of a general nature. With respect to particular circum-

stances, local, state, and federal laws and regulations should be reviewed.

Neither API nor any of API’s employees, subcontractors, consultants, committees, or other assignees

make any warranty or representation, either express or implied, with respect to the accuracy, complete-

ness, or usefulness of the information contained herein, or assume any liability or responsibility for any

use, or the results of such use, of any information or process disclosed in this publication. Neither API

nor any of API’s employees, subcontractors, consultants, or other assignees represent that use of this

publication would not infringe upon privately owned rights.

API publications may be used by anyone desiring to do so. Every effort has been made by the Institute to

ensure the accuracy and reliability of the data contained in them; however, the Institute makes no rep-

resentation, warranty, or guarantee in connection with this publication and hereby expressly disclaims

any liability or responsibility for loss or damage resulting from its use or for the violation of any authorities

having jurisdiction with which this publication may conflict.

API publications are published to facilitate the broad availability of proven, sound engineering and op-

erating practices. These publications are not intended to obviate the need for applying sound engi-

neering judgment regarding when and where these publications should be utilized. The formulation and

publication of API publications is not intended in any way to inhibit anyone from using any other prac-

tices.

Any manufacturer marking equipment or materials in conformance with the marking requirements of an

API standard is solely responsible for complying with all the applicable requirements of that standard.

API does not represent, warrant, or guarantee that such products do in fact conform to the applicable

API standard.

by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission

from the publisher. Contact the Publisher, API Publishing Services, 200 Massachusetts Avenue, NW, Washing-

ton, DC 20001.

Foreword

Nothing contained in any API publication is to be construed as granting any right, by implication or other-

wise, for the manufacture, sale, or use of any method, apparatus, or product covered by letters patent.

Neither should anything contained in the publication be construed as insuring anyone against liability for

infringement of letters patent.

The verbal forms used to express the provisions in this specification are as follows:

—

the term “shall” denotes a minimum requirement in order to conform to the standard;

—

the term “should” denotes a recommendation or that which is advised but not required in order to

conform to the standard;

—

the term “may” denotes a course of action permissible within the limits of a standard;

—

the term “can” is used to express possibility or capability.

This document was produced under API standardization procedures that ensure appropriate notification

and participation in the developmental process and is designated as an API standard. Questions con-

cerning the interpretation of the content of this publication or comments and questions concerning the

procedures under which this publication was developed should be directed in writing to the Director of

Standards, American Petroleum Institute, 200 Massachusetts Avenue, NW, Washington, DC 20001.

Requests for permission to reproduce or translate all or any part of the material published herein should

also be addressed to the director.

Generally, API standards are reviewed and revised, reaffirmed, or withdrawn at least every five years. A

one-time extension of up to two years may be added to this review cycle. Status of the publication can be

ascertained from the API Standards Department, telephone (202) 682-8000. A catalog of API publica-

tions and materials is published annually by API, 200 Massachusetts Avenue, NW, Washington, DC

20001.

Suggested revisions are invited and should be submitted to the Standards Department, API, 200 Mas-

sachusetts Avenue, NW, Washington, DC 20001, standards@api.org.

iii

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

(API RP 7G-1-2023_e1_e2-2024,（共100页）,pdf,6.16MB,https://bjxwk.com/doc/143897/)

展开>> 收起<<

API RP 7G-1-2023_e1_e2-2024.pdf

共100页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

API RP 7G-1-2023_e1_e2-2024

相关推荐

开通VIP享超值会员特权

相关内容

推荐作者

热门标签

举报选择: