IEC 61000-4-34-2009

VIP免费
IEC 61000-4-34
Edition 1.1 2009-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electromagnetic compatibility (EMC) –
Part 4-34: Testing and measurement techniques – Voltage dips, short
interruptions and voltage variations immunity tests for equipment with mains
current more than 16 A per phase
Compatibilité électromagnétique (CEM) –
Partie 4-34: Techniques d'essai et de mesure – Essais d'immunité aux creux de
tension, coupures brèves et variations de tension pour matériel ayant un
courant d’alimentation de plus de 16 A par phase
IEC 61000-4-34:2005+A1:2009
BASIC EMC PUBLICATION
PUBLICATION FONDAMENTALE EN CEM
®
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2009 IEC, Geneva, Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 61000-4-34
Edition 1.1 2009-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electromagnetic compatibility (EMC) –
Part 4-34: Testing and measurement techniques – Voltage dips, short
interruptions and voltage variations immunity tests for equipment with mains
current more than 16 A per phase
Compatibilité électromagnétique (CEM) –
Partie 4-34: Techniques d'essai et de mesure – Essais d'immunité aux creux de
tension, coupures brèves et variations de tension pour matériel ayant un
courant d’alimentation de plus de 16 A par phase
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE CG
ICS 33.100.20
PRICE CODE
CODE PRIX
ISBN 2-8318-1049-2
BASIC EMC PUBLICATION
PUBLICATION FONDAMENTALE EN CEM
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
®
– 2 – 61000-4-34 © IEC:2005+A1:2009
CONTENTS
FOREWORD...........................................................................................................................4
INTRODUCTION.....................................................................................................................6
1 Scope...............................................................................................................................7
2 Normative references .......................................................................................................7
3 Terms and definitions .......................................................................................................8
4 General ............................................................................................................................9
5 Test levels........................................................................................................................9
5.1 Voltage dips and short interruptions ......................................................................10
5.2 Voltage variations (optional) ..................................................................................11
6 Test instrumentation.......................................................................................................13
6.1 Test generator.......................................................................................................13
6.2 Power source ........................................................................................................14
7 Test set-up .....................................................................................................................14
8 Test procedures .............................................................................................................14
8.1 Laboratory reference conditions ............................................................................15
8.2 Execution of the test..............................................................................................15
9 Evaluation of test results ................................................................................................18
10 Test report......................................................................................................................18
Annex A (normative) Test generator current drive capability ................................................19
Annex B (informative) Electromagnetic environment classes................................................21
Annex C (informative) Vectors for three-phase testing .........................................................22
Annex D (informative) Test instrumentation .........................................................................28
Annex E (informative) Dip immunity tests for equipment with large mains current ................31
Bibliography..........................................................................................................................33
Figure 1 – Voltage dip – 70 % voltage dip sine wave graph...................................................12
Figure 2 – Voltage variation ..................................................................................................12
Figure 3a – Phase-to-neutral testing on three-phase systems ...............................................17
Figure 3b – Phase-to-phase testing on three-phase systems – Acceptable Method 1
phase shift............................................................................................................................17
Figure 3c – Phase-to-phase testing on three-phase systems – Acceptable Method 2
phase shift............................................................................................................................17
Figure 3d – Not acceptable – phase-to-phase testing without phase shift..............................17
Figure A.1 – Circuit for determining inrush current drive capability........................................20
Figure C.1 – Phase-to-neutral dip vectors.............................................................................22
Figure C.2 – Acceptable Method 1 – phase-to-phase dip vectors ..........................................24
Figure C.3 – Acceptable Method 2 – phase-to-phase dip vectors ..........................................26
Figure D.1 – Schematic of example test instrumentation for voltage dips and short
interruptions using tapped transformer and switches.............................................................28
(IEC 61000-4-34-2009,(共70页),pdf,1.29MB,https://bjxwk.com/doc/13593/)
声明:本文档系会员上传,若文档所含内容侵犯了您的版权或隐私,请立即通知,我们立即给予侵权申诉删除!
相关推荐
-
VIP专免2024-12-12 17
-
VIP免费2025-01-17 8
-
VIP免费2025-01-17 9
-
VIP免费2025-01-17 10
-
VIP免费2025-01-17 9
-
VIP免费2025-01-17 7
-
VIP免费2025-01-17 7
-
VIP免费2025-01-17 9
-
VIP免费2025-01-17 8
-
VIP免费2025-01-17 8
作者:Carl
分类:国际标准
价格:12星币
属性:70 页
大小:1.29MB
格式:PDF
时间:2024-09-01
相关内容
-
GJB 150.26-2009 军用装备实验室环境试验方法 流体污染试验
分类:中国标准
时间:2024-11-20
标签:实验室
格式:PDF
价格:8 星币
-
GJB 150.27-2009 军用装备实验室环境试验方法 爆炸分离冲击试验
分类:中国标准
时间:2024-11-20
标签:实验室
格式:PDF
价格:8 星币
-
GJB 150.28-2009 军用装备实验室环境试验方法 酸性大气试验
分类:中国标准
时间:2024-11-20
标签:实验室
格式:PDF
价格:8 星币
-
GJB 150.29-2009 军用装备实验室环境试验方法 弹道冲击试验
分类:中国标准
时间:2024-11-20
标签:实验室
格式:PDF
价格:8 星币
-
GBT 150.1~150.4-2024 压力容器
分类:中国标准
时间:2024-11-29
标签:压力容器
格式:PDF
价格:12 星币